Oxide-resistant tungsten carbide high-temperature forming tools by innovative coatings and mechanical interface manipulation - proTool
Project summary
The project “proTool" is focussed the development of solutions for an increased wear resistance of high-temperature-applications forming tools by creation of a competent and efficient European network of universities, institutes, and industrial partners. The developments aim for innovative surfaces, coatings and interfaces. The process restrictions of forming technologies can be traced back to overloads of allowed forming tool strains. Therefore, the performance of the forming tools are determining the productive application of forming technologies. The technological limits, especially in warm and hot forming, are set by thermal tool strain and complex tribological conditions. Through the application of new carbide grades, innovative substrate pre- and post-treatment and the advanced development of coating technologies a performance increase of warm and hot forming tools is expected to be achieved.Project Details
Call
Call 2020
Call Topic
Innovative surfaces, coatings and interfaces
Project start
01.06.2021
Project end
31.05.2024
Total project costs
1.023.723 €
Total project funding
807.846 €
TRL
2 - 6
Coordinator
Dr. Andreas Sterzing
andreas.sterzing@iwu.fraunhofer.de
Fraunhofer Institute for Machine Tools and Forming Technology IWU, Reichenhainer Str. 88, 09126 Chemnitz, Germany
Partners and Funders Details
Consortium Partner | Country | Funder | |
---|---|---|---|
Fraunhofer Institute for Machine Tools and Forming Technology IWU https://www.iwu.fraunhofer.de/ |
Research org. | Germany | DE-SMWK |
Westsächsische Hochschule Zwickau University of Applied Science https://www.fh-zwickau.de/ |
University | Germany | DE-SMWK |
CIE Legazpi https://www.cieautomotive.com/ |
SME | Spain | ES-EJ-GV/Innobasque |